Back to Top

3D Robotics

3D Robotics

Show: 

3D ROBOTICS is one of our best categories. There are many types of 3D Robotics's in the 3D Robotics category.

Displaying 1 to 8 (of 29 products)
Result Pages:  1  2  3  4   
  • ArduStation
    New Portable Open-Source Ground Station (Arduino and Xbee Based) ...
    Model : SK9365
    Manufacturer : 3D Robotics
    Quantity : 4
    Weight (Kg) : 0.15
    Our Price:  $65.00
  • Absolute Pressure and Temperature Sensor - BMP085
    The BMP085 is a high-precision, ultra-low power barometric pressure sensor. It offers a measuring range of 300 to 1100 hPa with an absolute accuracy of +/- 0.03 hPa. The BMP085 is based on piezo-resistive technology for EMC robustness, high accuracy and linearity as well as long term stability. This sensor board supports two supply voltages modes: 1.8-3.3V and 4 to 5.5V (solder jumper selectable). It is designed to be connected directly to a micro-controller via the I²C bus; it has a build power regulator and I²C translator that allow you to use i ...
    Model : SKU920056
    Manufacturer : 3D Robotics
    Quantity : 8
    Weight (Kg) : 0.04

    Our Price:  $34.95

  • Antenna 433MHz RP-SMA 2dBi
    This is a great 433MHz antenna. Ideal for 3DR Radios (either "Air" or "Ground" modules), can be rotated and tilted! NOTE: This antenna comes with a blue dot sticker! ...
    Model : SKU298654
    Manufacturer : 3D Robotics
    Quantity : 2
    Weight (Kg) : 0.03

    Our Price:  $9.95

  • Antenna 900MHz RP-SMA 2dBi
    This is a great 868MHz-928MHz antenna. Ideal for 3DR Radios (either "Air" or "Ground" modules), can be rotated and tilted! Note: This antenna comes with a red sticker! ...
    Model : SKU88212
    Manufacturer : 3D Robotics
    Quantity : 3
    Weight (Kg) : 0.02

    Our Price:  $9.95

  • APM Power Module with XT60 Connectors
    APM 2.5 Power Module The APM 2.5 Power Module is a simple way of providing your APM 2.5 with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. The on-board switching regulator outputs 5.3V and a maximum of 2.25A from up to a 4S LiPo battery. The Power Module comes completely assembled with your choice of Deans or XT-60 connectors, and wrapped in shrink tubing for protection.   Note: The Power Module is only designed to power APM, a RC receiver and APM ac ...
    Model : SKU93743
    Manufacturer : 3D Robotics
    Quantity : 8
    Weight (Kg) : 0.04

    Our Price:  $34.95

  • Ardupilot Mega 2.0 Case (Side Entry)
    This is the official case for the APM 2.0 system. It's designed to keep your electronics safe while looking great at the same time! The pins are uncovered and have labels and numbers so that you can keep track of what has been connected and where. This option is for the side entry case, depending on your current APM 2.0 set up. NOTE: This product is compatible with APM 2.0 only! ...
    Model : SKU8822
    Manufacturer : 3D Robotics
    Quantity : 3
    Weight (Kg) : 0.05

    Our Price:  $9.90

  • Ardupilot Mega 2.5/2.6 Case  (Side entry)
    This is the official case for the APM 2.5/2.6+ system.  It's designed to keep your electronics safe while looking great at the same time!  The new APM 2.5/2.6 enclosure is made of black translucent ABS plastic. It protects your electronics while allowing access to all pins and connectors. The inside of the enclosure is lined with ESD safe open cell foam to ensure the barometric pressure sensor is surrounded by static air and prevent unwanted readings due to airflow over the sensor. The screws that secure the enclosure have been moved to the top ...
    Model : SK9267
    Manufacturer : 3D Robotics
    Quantity : 11
    Weight (Kg) : 0.05

    Our Price:  $9.90

  • Ardupilot Mega 2.5/2.6 Case  (Top entry)
    This is the official case for the APM 2.5/2.6 system.  It's designed to keep your electronics safe while looking great at the same time!  The new APM 2.5/2.6 enclosure is made of black translucent ABS plastic. It protects your electronics while allowing access to all pins and connectors. The inside of the enclosure is lined with ESD safe open cell foam to ensure the barometric pressure sensor is surrounded by static air and prevent unwanted readings due to airflow over the sensor. The screws that secure the enclosure have been moved to the top f ...
    Model : SK9268
    Manufacturer : 3D Robotics
    Quantity : 7
    Weight (Kg) : 0.10

    Our Price:  $9.90

  • ArduStation
    New Portable Open-Source Ground Station (Arduino and Xbee Based). Your robot's best friend! NOTE: Some assembly required! -Source Code -Board layout and schematic -Assembly Instructions -Telemetry protocol and data display explanations      Features Atmega328 at 16Mhz with Arduino Bootloader. XBee Socket and 3.3V powered (I've included some holes near to the antenna so you can hold it with a strap). Wireless programing: You can use XBEE to program it (needs 2n2222 transistor available at any radiosha ...
    Model : SK9365
    Manufacturer : 3D Robotics
    Quantity : 4
    Weight (Kg) : 0.15

    Our Price:  $65.00

Displaying 1 to 8 (of 29 products)
Result Pages:  1  2  3  4